- Description
- Tech Specs
- Reviews
The DBX instantaneous water heater is only suitable for use with three phase power supply and is available in 4 different outputs, 18kW, 21kW, 24kW & 27kW
It is an ideal solution for supplying single or multiple outlets, It will maintain an exact temperature even when the inlet water pressure fluctuates.
The outlet temperature is factory set to 50°C, the installer can adjustable from 30° to 60°C
Suitable for use in commercial kitchens
FEATURES
- A constant supply of hot water at the temperature selected
- Provides a constant supply of hot water to one or more outlets
- automatically switches on/off with the flow rate is high or low
- Regulates power consumption electronically
- Precise temperature control even when there are fluctuations in water pressure or voltage
- Bare wire heating element
- The required outlet temperature can be set via two touch sensitive keys
- Enables selection of two pre-programmed temperature settings
| MODEL | DBX12 | DBX21 | DBX24 | DBX27 |
| Nominal supply voltage | 3/PE 380 –415V~ | 3/PE 400V~ | ||
| Power Rating (kW) | 18.0 | 21.0 | 24.0 | 27.0 |
| Rated Current (A) | 26 | 30 | 35 | 39 |
| Element type | Bare wire | |||
| Rated pressure | 1 MPa (10 bar) | |||
| Temperature adjustment range | 30°C - 60°C | |||
| Maximum inlet temperature | 30°C | |||
| Minimum flow rate (l/min) | 2.5 | |||
| Maximum flow rate (l/min) | 7.0 | 8.0 | 8.0 | 9.0 |
| Flow rate @ 38° C (l/min) | 9.8 | 11.4 | 13.0 | 14.8 |
| Flow rate @ 50° C (l/min) | 6.8 | 7.9 | 9.0 | 10.2 |
| Pressure loss @ 2.5 l/min | 0.2 bar | |||
| Pressure loss @ 9.0 l/min | 1.3 bar | |||
| Required specific water resistance @ 15° C | >1300 ohm.cm | |||
| Dimensions H x W x D (mm) | 466 x 231 x 97 | |||
| Maximum weight (kg) | 3.7 | |||
| Rated volume (litres) | 0.4 | |||
| Water connections (BSP) | 1/2” | |||
| Protection class | IP25 | |||
All data quoted at nominal supply voltage. Standard European voltage tolerances of -6% to + 10% may be applied. A minimum water pressure of 0.2 MPa (2 bar) is recommended for optimum performance. The appliance must not be subject to more than 1 MPa (10 bar).
